DRY VAN: Achieving $8.075 Gross And Extraordinary $2.75 RPM

Week 4th December – 10th December On the 22nd (Monday) January in the late afternoon, one of our carriers hired an owner-operator expected to pick up a load at that time. Our dispatcher excelled in booking and achieving excellent results with the driver from the very beginning, a crucial factor for carriers and owner-operators to establish a positive start to a long-lasting relationship. We won’t be modest and would assert that this individual had a dream start in the new company, being highly content with earning $8,075 on just 2,940 miles (including empty miles). The carrier was equally proud, confident in the results, and anticipated a potential long-lasting collaboration with the new owner-operator in the company. Now, let’s delve into how the driver generated $8,075. Here’s a breakdown of the loads handled during that week: Hammond, IN, to Morehead, KY: Revenue: $1,600 Deadhead: 17 miles Loaded: 374 miles RPM: $4.09 Weight: 12,000 lbs Commodity: Insulation Lesage, WV, to Whitewater, WI: Revenue: $1,300 Deadhead: 77 miles Loaded: 581 miles RPM: $1.98 Weight: 38,500 lbs Commodity: Paint non-haz S Beloit, IL, to O’Fallon, MO: Revenue: $1,500 Deadhead: 36 miles Loaded: 332 miles RPM: $4.07 Weight: 11,123 lbs Commodity: Chips Quincy, IL, to New Concord, OH: Revenue: $1,800 Deadhead: 105 miles Loaded: 562 miles RPM: $2.70 Weight: 40,781 lbs Commodity: FAK Canton, OH, to Kansas City, MO: Revenue: $1,875 Deadhead: 73 miles Loaded: 782 miles RPM: $2.19 Weight: 42,670 lbs Commodity: Food products In addition, it’s noteworthy that 2 out of the total 5 loads in the week were priced at more than $4 per mile, showcasing impressive negotiation skills. Considering that the average rate per mile (RPM) per DAT in the previous week was $2.15, this is a substantial accomplishment. Another positive aspect is that the total RPM he achieved is $2.75, surpassing both the Reefer and flatbed average RPM. Lastly, the driver finished the week in a decent area, having already been assigned a one-day transit load with a revenue of $1,900. However, this information will resurface next week, depending on whether the driver achieves another outstanding result, considering the stiff competition with other drivers. If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 630-800-3648. Your success story begins with us.

DRY VAN: Achieving $7.250 Gross And Excellent $2.13 RPM – An Exceptional Performance

Week 4th December – 10th December On the 4th of December (Monday), our driver conducted a delivery in Cochran, GA, and awaited his next load. He concluded the week in Cochran, GA, with a total of $6,100 and a 2.34$ Revenue Per Mile (RPM) from the previous week, demonstrating commendable performance. The driver’s weekly objective was to maximize revenue while maintaining a minimum of $2 per mile, a goal achievable in this market with our team of professionals. Now, let’s delve into how the driver generated $7,250. Here’s a breakdown of the loads handled during that week: Macon, GA, to Metairie, LA: Revenue: $1,000 Deadhead: 39 miles Loaded: 497 miles RPM: $1.87 Weight: 35,000 lbs Commodity: FAK New Orleans, LA, to Ore City, TX: Revenue: $1,000 Deadhead: 6 miles Loaded: 389 miles RPM: $2.53 Weight: 11,000 lbs Commodity: Food-related product Hope, AR, to Marion, MS: Revenue: $950 Deadhead: 101 miles Loaded: 361 miles RPM: $2.06 Weight: 32,000 lbs Commodity: FAK Red Bay, AL, to Blair, NE: Revenue: $2,000 Deadhead: 182 miles Loaded: 817 miles RPM: $2.00 Weight: 42,750 lbs Commodity: FAK Crete, NE, to Cleveland, TN: Revenue: $2,300 Deadhead: 96 miles Loaded: 921 miles RPM: $2.26 Weight: 42,500 lbs Commodity: Food products Additionally, it’s worth noting that the driver started the week in a challenging area but managed to achieve impressive revenue by the end of the week. Moreover, he concluded the week in a slightly better area than the previous week. As an owner-operator, the driver expressed satisfaction with the performance and was motivated to continue delivering excellent results in the upcoming weeks, especially with the promising outlook due to the approaching Christmas holidays. Here is the picture of the route he drove, starting from GA, going all the way to NE, and coming down to Cleveland, TN. It’s noteworthy that this route has no tolls, enhancing the profitability of the week even further. If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 630-800-3648. Your success story begins with us.  

DRY VAN: Achieving $8.150 Gross And Great $2.05 RPM – An Exceptional Performance

Week 13th November– 19th November On the 13th of November, we had an owner-operator with dry van equipment stationed in Bishopville, SC. Having been empty over the weekend, he eagerly awaited his Monday load. Our team showcased their best performance, orchestrating a remarkable revenue of $8,150 with a total rate per mile of $2.05 by the week’s end, concluding in Odessa, TX. It’s crucial to note that this particular owner-operator seeks long-haul opportunities to maximize his weekly revenue. Being an owner-operator, as we mentioned, this driver aims for consistent weekly revenue while also prioritizing fuel efficiency and achieving a commendable rate per mile result. Recognizing the precision demanded by the highly competitive market conditions, our dispatcher worked closely with the driver to expertly select and book loads, meticulously calculating factors such as trip miles and destination to ensure outstanding revenue and a decent RPM. Now, let’s delve into how the driver generated $8,150. Here’s a breakdown of the loads handled during that week: Wadesboro, NC, to Honeoye, NY: $1,500 | 64 miles Deadhead | 698 miles Loaded | $1.97 RPM | 26,000 lbs | Commodity: Food Packaging Material Honeoye, NY, to Tar Heel, NC: $1,400 | 0 miles Deadhead | 682 miles Loaded | $2.05 RPM | 7,800 lbs | Commodity: Consumer Goods Wadesboro, NC, to Honeoye, NY: $1,450 | 90 miles Deadhead | 698 miles Loaded | $1.84 RPM | 32,000 lbs | Commodity: Food Packaging Material Lancaster, NY, to Odessa, TX: $3,800 | 67 miles Deadhead | 1,680 miles Loaded | $2.18 RPM | 40,000 lbs | Commodity: Machine Parts/Filters In addition to the aforementioned, it’s noteworthy that this week the driver completed 4 loads instead of the usual 5 or 6. The average deadhead from one load to the following was around 54 miles, and the average weight he pulled was 26,450 lbs, contributing to fuel efficiency for the truck. If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 301-900-3180. Your success story begins with us.

DRY VAN: Achieving $7.250 Gross And Great $2.28 RPM – An Excellent Week

Week 9th October – 15th October On the 9th of October, this month, we had an empty truck with a dry van trailer stationed in Hillsdale, MI. The driver was enjoying his weekend at home and geared up for an early Monday morning start. Our team orchestrated a remarkable achievement, securing a gross revenue of $7,250 in a market that was averaging approximately $1.9 per mile for a dry van. However, this truck defied the norm, being dispatched at an impressive rate of $2.28 per mile for the week. It’s worth noting that the driver covered 3,175 miles throughout the week, maintaining impeccable punctuality on every load. The exceptional teamwork between the driver and our dispatcher played a pivotal role in this outstanding performance. This driver operates under a lease-to-purchase arrangement and consistently aims for substantial weekly revenue. Our dispatcher recognizes the necessity for precision due to the highly demanding market conditions. The driver expertly selected and booked loads, meticulously calculating factors like trip miles and destination to achieve outstanding revenue and an impressive RPM. The journey began in a favorable location in Michigan and concluded in Atlanta, GA, a region not typically advantageous for a dry van. However, Atlanta’s potential is unlocked when one knows how to select and navigate the right loads. For context, the load this driver secured for the following week out of Atlanta, GA, will bring him back close to Ohio for $1,350 with an RPM of $1.91, scheduled for delivery next Tuesday. Returning to this week, let us unveil how the driver generated $7,250. Here’s a breakdown of the loads handled during that week: Constantine, MI, to Springfield, MO: $1,450 | 63 miles Deadhead | 618 miles Loaded | $2.13 RPM | 5,200 lbs | Commodity: Palletized FAK Mt. Grove, MO, to Dumas, AR: $900 | 65 miles Deadhead | 307 miles Loaded | $2.42 RPM | 43,000 lbs | Commodity: Dried Lamb Greenville, MS, to Bensenville, IL: $1,500 | 69 miles Deadhead | 685 miles Loaded | $1.99 RPM | 20,457 lbs | Commodity: Food Stuffs River Grove, IL, to Eau Claire, WI: $700 | 8 miles Deadhead | 308 miles Loaded | $2.22 RPM | 10,000 lbs | Commodity: Dry Goods Stevens Point, WI, to McDonough, GA: $2,700 | 115 miles Deadhead | 937 miles Loaded | $2.57 RPM | 43,000 lbs | Commodity: Paper Additional Information: The driver maintained an average deadhead of 64 miles and covered an average range of 571 miles for loaded miles, reflecting exceptional performance. Furthermore, the average cargo weight for the week was 24,331 lbs, a notable factor as lower weight equates to reduced fuel consumption on the loads. Both the driver and the company owner expressed great satisfaction with the achievements of this driver.” If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 301-900-3180. Your success story begins with us.

FLATBED: Achieving $9050 Gross And Impressive $2.41 RPM – An Outstanding Revenue

Week 2nd October – 9th October On Monday, October 2nd, we dispatched a truck equipped with a 48′ flatbed, en route to a delivery in the Dallas, TX area, following a recent 34-hour reset. We take great pride in presenting an exceptional accomplishment in our collaboration with this highly demanding truck driver. We tailored the loads to his preferences, resulting in an impressive achievement by following Monday finishing up in San Antonio TX: he covered 3,750 miles in a single week and generated a substantial revenue of $9,050. Notably, the national flatbed rate per mile, as per truckstop.com, was $2.3 for that week, as well as for previous weeks. Nevertheless, we consistently managed to surpass this average, even when accounting for the included empty miles. This driver is renowned as the fleet’s top performer, consistently covering 600-700 miles daily. His route spans from the scenic landscapes west of Pittsburgh, PA, all the way to the Colorado border. Furthermore, his home base is in Memphis, TN, where he insists on spending his 34-hour reset over the weekend with his family. We deeply respect this commitment and ensure it’s consistently upheld. In addition to his impressive mileage and commitment, this driver’s unwavering dedication extends to his readiness to transport and secure almost any type of cargo, except for those that are impractical. This unwavering commitment significantly streamlines the dispatcher’s tasks, facilitating the attainment of weekly goals. Here’s a breakdown of the loads they handled that week: Gainesville TX – Columbus NE: $1,850 | 71 miles Deadhead | 581 miles Loaded | $2.84 RPM | 46000lbs | Commodity: 12 Reels of Cable (no tarp) Concordia, KS, to Royse City, TX: $1,300| 153 miles Deadhead | 528 miles Loaded | $1.91 RPM | 25000lbs | Commodity: conveyor (no tarp) Ennis, TX, to Tulsa, OK: $800| 65 miles Deadhead | 290 miles Loaded | $2.25 RPM | 48000lbs | Commodity: Shingles (no tarp) Rogers, AR, to Louisville, KY: $2,100| 117 miles Deadhead | 572 miles Loaded |$3.05RPM | 48000lbs | Commodity: steel product (4′ tarp) Hamilton, OH, to San Antonio, TX: $3,000 | 134 miles Deadhead | 1240 miles Loaded | $2.18 RPM | 42000lbs | Commodity: construction material (6′ tarp) As an additional information to this need to mention that average DH this driver was running was 108mi and average range of the loads on the loaded miles was 642mi. Also average weight he hauled through the week was 41800lbs which is not the best maybe but considering the total revenue he made we consider it as an great performance. We would like to mention that we could possibly have booked better RPM on some loads but we couldn’t be able to achieve this revenue in that case. As mentioned earlier that driver is a hard worker and trying to be home every weekend but still make good revenue.  Driver and the company owner were very satisfied from what this truck achieved for the week. Another great thing about this week is that the route was out of the toll ways and we belive the driver didn’t spent more than $100 on a tolls. If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 301-900-3180. Your success story begins with us.    

FLATBED: Achieving $8000 Gross And Impressive $3.1 RPM – A Successful Week

Week 25th Sep – 2nd October On September 25th (Monday), a truck with a 53′ flatbed trailer completed a delivery in Philadelphia, PA, wrapping up a load from the previous week. Philadelphia, PA isn’t typically the preferred destination for truck drivers, but when a high-paying weekend run presents itself, it’s absolutely worth considering. The following Monday, this truck was en route to Broussard, LA, with a total gross revenue of $8,000 at a rate of $3.1 per mile. It’s important to note that the national average rate per mile that week stood at $2.2 RPM, making this performance truly outstanding. This particular driver, operating under a lease-to-purchase arrangement, consistently aimed for both high revenue and strong RPM performance. Their goal was to surpass the national average RPM while still grossing around $1,000 per day before accounting for truck expenses and operational costs. Here’s a breakdown of the loads they handled that week: Mays Landing NJ – Scranton PA: $1.100 | 48 miles Deadhead | 173 miles Loaded | $4.98RPM | 46500lbs | Commodity: FAK Orwigsburg, PA, to Valley City, OH: $1.050| 70 miles Deadhead | 361 miles Loaded | $2.44RPM | 43500lbs | Commodity: Trees & Nursery Products Canton, OH, to Camp Hill, PA: $2.000| 52miles Deadhead | 300miles Loaded | $5.68RPM | 43680lbs | Commodity: FAK Aberdeen, MD, to Duncansville, PA, and Pittsburgh, PA: $1.050| 77 miles Deadhead | 286 miles Loaded |$2.89RPM | 48000lbs | Commodity: Building Material Clinton, PA, to Broussard, LA: $2.800 | 20miles Deadhead | 1200 miles Loaded | $2.3RPM | 42000lbs | Commodity: steel product As an additional information to this need to mention that average DH this driver was running was 53mi and average range of the loads on the loaded miles was 464mi. Also average weight he hauled through the week was 44736lbs which is not the best maybe but considering the average RPM we consider it as an great performance. It’s not going to be a lot if mention that every load booked was over the national average RPM including the empty miles.  Driver and the company owner were very satisfied from what this driver achieved. If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 301-900-3180. Your success story begins with us.

DRY VAN: Achieving $6.730 Gross and Impressive $2.52 RPM – A Successful Week

Week 26th Sep – 2nd October On September 25th (Monday), a truck with a dry van trailer was stationed in Mantua, OH, awaiting its delivery appointment. By October 2nd (Monday), it had successfully reached Geneva, NY, generating a total revenue of $6,730, with an impressive rate of $2.52 per mile (RPM). It’s worth noting that the national average RPM during this period stood at $1.90. This particular driver, operating under a lease-to-purchase arrangement, consistently aimed for both high revenue and strong RPM performance. Their goal was to surpass the national average RPM while still netting around $1,000 per day after accounting for truck expenses and operational costs. Here’s a breakdown of the loads they handled that week: Oakwood Village, OH, to Ashland, VA: $1,400 | 20 miles Deadhead | 440 miles Loaded | $3.04 RPM | 40,000 lbs | Commodity: Palletized FAK Chester, VA, to Dalton, GA: $1,200 | 32 miles Deadhead | 554 miles Loaded | $2.05 RPM | 44,000 lbs | Commodity: Palletized FAK Dalton, GA, to Whitehall, OH: $900 | 5 miles Deadhead | 477 miles Loaded | $1.87 RPM | 44,000 lbs | Commodity: Rug Rolls Chillicothe, OH, to Grand Rapids, MI, and Ada, MI: $830 | 45 miles Deadhead | 350 miles Loaded | 20,295 lbs | Commodity: Paper Craft and Handmade Hart, MI, to Geneva, NY: $2,400 | 84 miles Deadhead | 666 miles Loaded | 43,000 lbs | Commodity: Food Products As an additional information to this need to mention that average DH this driver was running was 37mi and average range of the loads on the loaded miles was 497mi. Also average weight he hauled through the week was 38400lbs which is not the best maybe but considering the average RPM we consider it as an great performance. Driver and the company owner were very satisfied from what this driver achieved. If you’re ready to elevate your dispatch service and achieve results like these, visit our website at www.logisteroid.com or reach out to us today at 301-900-3180. Your success story begins with us.

Call Now Button